Primal RC is proud to introduce the 1/5 Scale Quicksilver Ready to Run gas powered Dragster! NOW 32cc!!
We hope that its High quality parts, performance and good looks will give you many hours of exciting tire shredding, asphalt burning RC Dragster Racing Fun!
We used lots of CNC aluminum and carbon fiber parts to make this a strong, reliable, fast machine while keeping the weight down.
New for 2021 We now also installed a Genuine Zenoah G320 2 stroke Gas Engine for great performance and reliability
- Carbon Fiber Lower frame plates, front lower wing mount and rear wing sides
- Zenoah G320 4 bolt 2 stroke pull start engine!
- Large 2 stage foam air filter and Genuine Walbro 1107 carburetor with manual choke for easy starts and low maintenance reliability and high performance
- 8000 RPM clutch for great launches off the starting line
- 19 tooth steel pinion gear and 55 tooth nylon spur gear for good overall speed and acceleration
- Dual outlet chrome plated 2 piece steel tuned pipe for great sound and performance
- Large rear high traction white letter belted drag racing tires with medium compound foams
- Chrome plated rear heavy duty nylon rims with aluminum bead-locks and steel 24mm hex inserts for added strength
- Chrome plated front wheels with straight ribbed racing tires
- Oversize rear adjustable aluminum wing with carbon fiber sides
- Light weight Front Polycarbonate wing with carbon fiber mount
- Strong Plastic roll cage and Polycarbonate body shell
- Rear mechanical disc brake system with built in cooling fan
- Ball bearings used throughout the entire vehicle
- 2.4 ghz 3 channel computer radio that features include:
- 4-AA Battery holder for light weight and improved balance
- Easy to read LCD screen
- 300 Meter max range 10 model memory
- Servo reversing on all channels
- Dual rate steering
- End point adjustment on all channels
- Exponential steering and throttle
- Anti-lock braking, Digital trim display
- Servo sub-trim for steering and throttle
- 3 character model naming
- Low battery memory retention
- Built in Fail-safe
- Low voltage alarm.
- 20KG All metal gear servos for precision steering
- 20KG All metal gear throttle/brake servo
- 1800mAh NIMH receiver/servo battery with USA wall charger
- 280cc fuel tank with quick fill system
- 3 Liter Red fuel storage container with easy fill system for quick mess free performance
- Aluminum Main frame brace for strength and rigidity.
- CNC Aluminum parts throughout the entire vehicle!
- CNC Aluminum 3 Piece transmission with Steel gears and Locked Axle.
- CNC Aluminum Axle tubes, supports and hubs
- CNC Aluminum locker with steel gear installed
- CNC Aluminum rear upper and lower main Chassis.
- CNC Aluminum upper brake pad support
- CNC Aluminum rear wing supports and mounts
- CNC Aluminum spur gear plate and cover
- CNC Aluminum enclosed clutch brace
- CNC Aluminum engine mounts
- CNC Aluminum chassis connector
- CNC Aluminum front skid plate and chassis protector
- CNC Aluminum Ball bearing push-pull steering system
- CNC Aluminum front axle supports and hubs
- CNC Aluminum rear inner and outer Tire Bead-locks and enclosed wheel nuts
Skill Level Advanced
Speed 45+ MPH
Length 61 inches
RTR Weight 24.5 pounds
Height 15.25 inches
Wheelbase 48.25 inches
Front Tires (pre-glued) 3.25 x 2.125 inches
Front Wheels 2.375 x .875 inches
Front Track 7 inches
Rear Tires (beadlock) 7.25 x 4 inches
Rear Wheel Outer Diameter 4.75 inches
Rear Wheel Inner Diameter 5.5 x 3.5 inches wide
Minimum Ground Clearance 0.5 inches
Rear Track 17.25 inches
Front Track 7 inches
Engine Zenoah 32cc (4 Bolt) 2 Stroke Gas Engine
Transmission Single Speed
Differential Type Locked
Brake Twin Disc Vented 2 Shoe Design
Drive System All Steel Gears with 1 Nylon Spur Gear
Steering Push / Pull design with CNC Aluminum, Ball Bearing Support
Radio 2.4 Ghz, 3 Channel Digital Radio
Servos Torque: 20 KG, Speed 0.12 sec/60 degrees(6.0V)
Battery Tray 90mm x 35 mm x 24 mm
Whats in the box?
|Radio||Rear Wing||Front Wing|
|Rear Wheels||Front Wheels||US Charger|
|Sticker Pack||Tool Kit|